Orion Car Audio - 2009-11 1

Below are all the different types of Orion Car Audio. Select the device of your choice, to download the manual

Contents

Connections and Installation Tips 1 Connect the RED wire to a constant 12 volt source This can be the memory wire for the head unit check to see if the radio is code protected before cutting or unplugging the memory wire or the 12 volt battery terminal of the amplifier 2 Connect the BLACK wire to ground The radio chassis or amplifier ground terminal are gener ally good locations for this connection 3 The BLUE wire should be connected to the am plifiers or signal processors that are being con trolled be the Remote Power Adapter It supplies a 12 volt output rated at 1 amp with a one to three second delay when triggered by signal on the GRAY wire 4 The GRAY wire may be connected to any wire from the head unit that measures above 5 ...